Simulating the meteorology and PM10 concentrations in Arizona dust storms using the Weather Research and Forecasting model with Chemistry (Wrf-Chem)

Nine dust storms in south-central Arizona were simulated with the Weather Research and Forecasting with Chemistry model (WRF-Chem) at 2 km resolution. The windblown dust emission algorithm was the Air Force Weather Agency model. In comparison with ground-based PM₁₀ observations, the model unevenly reproduces the dust-storm events. The model adequately estimates the location and timing of the events, but it is unable to precisely replicate the magnitude and timing of the elevated hourly concentrations of particles 10 µm and smaller ([PM₁₀]).Furthermore, the model underestimated [PM₁₀] in highly agricultural Pinal County because it underestimated surface wind speeds and because the model’s erodible fractions of the land surface data were too coarse to effectively resolve the active and abandoned agricultural lands. In contrast, the model overestimated [PM₁₀] in western Arizona along the Colorado River because it generated daytime sea breezes (from the nearby Gulf of California) for which the surface-layer speeds were too strong. In Phoenix, AZ, the model’s performance depended on the event, with both under- and overestimations partly due to incorrect representation of urban features. Sensitivity tests indicate that [PM₁₀] highly relies on meteorological forcing. Increasing the fraction of erodible surfaces in the Pinal County agricultural areas improved the simulation of [PM₁₀] in that region. Both 24-hr and 1-hr measured [PM₁₀] were, for the most part, and especially in Pinal County, extremely elevated, with the former exceeding the health standard by as much as 10-fold and the latter exceeding health-based guidelines by as much as 70-fold. Monsoonal thunderstorms not only produce elevated [PM₁₀], but also cause urban flash floods and disrupt water resource deliveries. Given the severity and frequency of these dust storms, and conceding that the modeling system applied in this work did not produce the desired agreement between simulations and observations, additional research in both the windblown dust emissions model and the weather research/physicochemical model is called for.

Implications: While many dust storms can be considered to be natural, in semi-arid climates such storms often have an anthropogenic component in their sources of dust. Applying the natural, exceptional events policy to these storms with strong signatures of anthropogenic sources would appear not only to be misguided but also to stifle genuine regulatory efforts at remediation. Those dust storms that have resulted, in part, from passage over abandoned farm land should no longer be considered “natural”; policymakers and lawmakers need to compel the owners of such land to reduce its potential for windblown dust.     

The assessment and prediction of temporal variations in surface water quality—a case study

In order to optimize the processes of sampling, monitoring, and management, the initial aim of this paper was to develop a model for the definition and prediction of temporal changes of water quality. In the case of the Morava River Basin (Serbia), the patterns of temporal changes have been recognized by applying different multivariate statistical techniques. The results of the conducted cluster analysis are the indicators of the existence of the three monitoring periods: the low-water, transitional, and high-water periods, which is in accordance with changes in the water flow in the analyzed river basin. A possibility of reducing the initial data set and recognizing the main pollution sources was examined by carrying out the principal component/factor analysis. The results indicate that the natural factor has a dominant influence in temporal groups. In order to recognize the discriminatory water quality parameters, a discriminant analysis (DA) was carried out. Conducting the DA enabled a significant reduction in the data set by the extraction of two parameters (the water temperature and electrical conductivity). Furthermore, the artificial neural network technique was used for testing the possibility of predicting changes in the values of the discriminant factors in the monitoring periods. The reliability of this method for the prediction of temporal variations of both extracted parameters within all temporal clusters has been proven.     

Larval and Juvenile Fish Assemblage Structure of Inshore Habitats in the Middle Reaches of Li River,China: Spatial and Temporal Patterns in Relation to Abiotic Factors

To evaluate the effect of abiotic factors on larval and juvenile fish assemblage in shallow waters of middle reaches of Li River, Guilin, China. Samplings were taken monthly at 7 stations in the mainstream and 2 stations in 3 tributaries from May 2014 to April 2015. Synchronously, temperature, pH, turbidity, conductivity, dissolved oxygen rainfall and discharge were obtained. In all, 11.886 larval and juvenile fish from 18 species belonging to 8 families, 16 genera was captured. Principal Component Analysis (PCA) showed obvious significant difference between the environmental variables across sampling areas and months. The results of Canonical Correspondence Analysis (CCA) indicated that water temperature, turbidity, discharge and rainfall were dominant factors on larval and juvenile fish assemblage.     

Promoting e-mobility in India: challenges,framework, and future roadmap

The purpose of the research is to identify the critical challenges that are impeding the adoption of e-mobility in India. It also aims to give a roadmap how to address these challenges while taking into considerations concerns of all the relevant stakeholders. Based on an in-depth literature review, an exploratory research design is employed to delve deep into various aspects of e-mobility. This is followed by a three-phase Delphi technique to identify and rate the e-mobility challenges in the Indian context. The study successfully identifies four different categories of challenges and proposes integrative framework for e-mobility. Further, the research goes on to lay out the future roadmap for mass adoption of electric vehicles (EVs) in India. The research is novel in terms of presenting a holistic viewpoint on e-mobility in India. Its originality lies in identifying the major inhibitors obstructing EVs adoption in India and then suggesting the roadmap how to overcome these impediments for mass adoption of e-mobility.     

High Toughness and Fast Crystallization Poly(Lactic Acid)/Polyamide 11/SiO<Subscript>2</Subscript> Composites

A poly(lactic acid) (PLA)/polyamide 11 (PA11)/SiO₂ composite was mixed from PLA, PA11, and nanosilica particles through twin-screw extrusion. The PLA/PA11/SiO₂ composite was evaluated with tensile and Izod impact tests, light transmission and haze measurement, and isothermal and nonisothermal crystallization behavior determinations. The PLA/PA11/SiO₂ (97.0/3.0) composite had approximately 10.8% less ultimate tensile strength than neat PLA, but it had greater ductility and approximately ninefold greater elongation at break. A dimple morphology was observed on the fractural surface of the PLA/PA11/SiO₂ composite, indicating that the incorporation of PA11 and nanosilica particles increased the ductility of the PLA matrix. PLA with less than 3 wt% of PA11 and 0.5 phr of nanosilica particles had an Izod impact strength of 8.72 kJ/m². PA11 and nanosilica particles effectively toughened this PLA polymer; they accelerated both isothermal and nonisothermal crystallization rates and increased the crystallinities of the resulting composites under isothermal and nonisothermal crystallization processes.     

Man-Made and Natural Fibres as a Reinforcement in Fully Biodegradable Polymer Composites: A Concise Study

Biodegradable and ecologically friendly polymer materials attract great attention of many scientific groups in the world as they fit well in the sustainable development policy and are considered to be “a right thing to do” by the general public. Such polymers can be modified by the addition of different fillers, favorably of natural origin. In the paper we provide a comparison between composites based on two biodegradable polymers: poly(lactic acid)—biodegradable, natural stock polymer and poly(butylene succinate)—biodegradable polymer produced from fossil based materials. For each polymer we have prepared a series of composites with different fibres (natural: hemp and flax, and manmade: Cordenka) and different filler loadings. To fully characterize obtained materials thermal, mechanical and surface free energy measurements were performed, completed with morphology observations and an attempt to compare the experimental data for tensile measurements with values obtained using the modified rule of mixtures. The tensile results calculated using the modified rule of mixture for below 30% fibre loading are found to be fitting the experimental data. Composites mechanical properties and morphology were strongly affected by the type of fibre used and its loading, however thermal properties remained almost unchanged. In specific, Cordenka fibres tend to form bunches which presence greatly influences the mechanical properties but still our studies have shown clear advantage of manmade Cordenka fibres over the hemp and flax fibres when considering distribution and fibre–polymer interaction.     

Sustainable management of construction site big visual data

Architecture, Engineering, Construction, Operation and Ownership (AECOO) team up in a multi-disciplinary collaborative system to create buildings and infrastructure. The participating disciplines have reached a state in which traditional methods and forms of input data introduce entropy that compromises sustainable construction in larger projects. It became difficult to reach planned optimum project duration and costs this way. New approaches based on the systematic digitalization of the building lifecycle, from design to demolition, can solve the problem by involving the concepts of building information modeling (BIM) systems and big data. Previous research on BIM and big data only studied the potential for construction performance. In addition to extending research into systems’ thinking and technical sustainability of big visual data, this paper extends our previous work in the area by introducing a new conceptual and technical framework for sustainable management of construction site big visual data.     

FAHP法在污泥板框调理剂综合评价中的应用

提出了一种新的污泥板框调理剂综合评价方法。传统的CST(毛细吸水时间)、污泥比阻、泥饼含水率等指标只能单一地评价泥饼脱水效果,为了实现对调理效果的综合评价,需要考虑药剂调理费用、运输处置成本、设备处理产能、滤液处理难度等多种因素。通过长期采集中试运行数据,考察了3种污泥板框调理剂对设备、泥饼、滤液和运行4个方面17个指标的影响。引入层次分析法和模糊数学综合评价法相结合的模糊层次分析法(FAHP)对3种污泥板框调理剂进行了综合评价,采用层次分析法确定指标权重;采用隶属函数对指标进行无量纲化处理,确定其隶属度,解决了指标间的可综合性问题;最后用加权平均法得出评价综合值,综合评价值表明,在这3种调理剂中,调理剂1的综合效果最优,更适合作为该厂的污泥板框脱水调理剂。     

The perception of aquaculture on the Swedish West Coast

Efforts are on the way on the Swedish West Coast to develop the capacity for cultivation of marine resources, notably of kelps. Given that this is a region of great natural and national heritage, public opposition to marine developments has been identified as a possible risk factor. This survey thus sought to shed light on awareness levels, perceptions of different types of aquaculture and on reactions to a scenario depicting future aquaculture developments on the West Coast. When asked about their general opinions of aquaculture, respondents tended to be favourable though a majority chose neutral responses. On the whole, respondents were favourable to the depicted scenario. Finally, it was found that the high-awareness group tended to be more supportive than the low or medium-awareness groups, hinting at the benefits of increasing awareness to reduce public aversion and to support a sustainable development of aquaculture on the Swedish West Coast.     

Minimizing irrigation water demand: An evaluation of shifting planting dates in Sri Lanka

Climate change coupled with increasing demands for water necessitates an improved understanding of the water–food nexus at a scale local enough to inform farmer adaptations. Such assessments are particularly important for nations with significant small-scale farming and high spatial variability in climate, such as Sri Lanka. By comparing historical patterns of irrigation water requirements (IWRs) to rice planting records, we estimate that shifting rice planting dates to earlier in the season could yield water savings of up to 6%. Our findings demonstrate the potential of low-cost adaptation strategies to help meet crop production demands in water-scarce environments. This local-scale assessment of IWRs in Sri Lanka highlights the value of using historical data to inform agricultural management of water resources when high-skilled forecasts are not available. Given national policies prioritizing in-country production and farmers’ sensitivities to water stress, decision-makers should consider local degrees of climate variability in institutional design of irrigation management structures.